How Can I Disassemble an iPod Nano 3rd Generation?

The ipod nano 3rd generation has a distinctive form that continues to appeal to customers, in spite of its getting been changed by a more recent design. Correct upkeep of the nano consists of changing the battery or the LCD display if both turns into broken or faulty. You do not will need mechanical or electrical talent to disassemble the ipod nano 3G to exchange the battery or LCD display with a single acquired from an ipod provide keep. Disassembling the nano by yourself will help save time and income that or else would be misplaced by taking it to a services middle.

Items You may Want

Towel Tweezers Phillips head screwdriver, modest Plastic pic

Set the towel on a table. Place the ipod nano 3rd generation on the towel experience down.

Insert the plastic pic into the seam at the facet of the nano amongst the front plastic cover and the back again metal cover. Transfer the pic down the aspect of the nano. Repeat this treatment on the other aspect and at the top rated and bottom.

Use your fingers to pull the back again metal cover off the front plastic cover. Place the back again metal cover aside.

Use the tiny Phillips head screwdriver to take away the two screws from the reduced appropriate corner inside of the front plastic cover. Repeat this method with the two screws at the reduce left corner and the two screws at the bottom of the front plastic cover.

Use the tweezers to shift the tan piece of plastic in the reduce proper corner of the plastic front cover to the proper. Use the tweezers to gently pull the tan piece of plastic up and out of the connector it is connected to that is on the logic board.

Use the tweezers to lift up and get rid of the metallic bracket that is in the within left corner of the plastic front cover. Place the metallic bracket aside.

Lift up on the best of the battery, which is within the front plastic cover and connected to the logic board. Use the tweezers to Transfer the tan piece of plastic connected to the logic board to the appropriate. Use the tweezers to get rid of the cable from the connector beneath the tan piece of plastic Place the battery and the logic board on the towel.

Use the tweezers to wiggle the battery loose from the logic board. Use your fingers to pull up on the battery. Use the tweezers to take away the cable connected to the battery from the connection on the logic board. Get rid of the battery from the logic board and place it aside.

Use the tweezers to launch the 4 plastic tabs surrounding the LCD frame inside of the front plastic cover. Use your fingers to eliminate the LCD frame and Place it aside.

Use the tweezers to loosen the LCD display screen from the front plastic cover. Use your fingers to pull the LCD display screen up and off the front plastic cover. Set the LCD display screen aside. The ipod nano 3rd generation is now disassembled.